- The Ferrari 12Cilindri Manuale, a limited-edition special series of the Ferrari 12Cilindri, introduces Ferrari’s new in-house developed Manuale by–wire system, which delivers an authentic manual driving experience while retaining all the advantages of Ferrari’s dual-clutch transmission (DCT), further enhancing the direct interaction between driver and car.
- The naturally aspirated V12 is paired with the new manual command architecture, featuring a gear lever and a clutch-by-wire pedal, which combines high-precision mechanics and electronics to offer a modern take on manual gear changes, alongside the option to drive in automatic mode.
- The Ferrari 12Cilindri Manuale (available in a limited run of 1,499) draws on Ferrari’s Tailor Made personalisation programme, offering exclusive specifications in which craftsmanship, design, and attention to detail come together more harmoniously than ever.
Ferrari unveiled the Ferrari 12Cilindri Manuale, a limited-edition special series of the Ferrari 12Cilindri that opens up a new way of experiencing the purest expression of Ferrari’s DNA, placing the relationship between driver input, mechanics, and control at the heart of the driving experience. Designed for those seeking a physical and engaging experience behind the wheel without compromising on usability, the car combines the driving emotions typical of Ferrari Gran Turismo models from the 1950s, 60s, and 70s with the most advanced contemporary technology, aiming to make the interaction between driver and car even more direct.
The Ferrari 12Cilindri Manuale is designed to deliver sublime and exclusive driving emotions through two major innovations: the manual command and the new clutch pedal, which together form the Manuale by-wire system, engineered entirely at Maranello. The system offers a contemporary reinterpretation of the analogue gear-shifting experience, leveraging the most advanced technology to ensure precision, repeatability, and ease of use. The intensive design and development work carried out by Ferrari have made it possible to translate the physicality of mechanical movement into an electronic signal while fully preserving its analogue feel, consistency, and naturalness. This was achieved through a highly integrated process that drew on a range of cross-functional expertise within the Company, including collaboration with the team responsible for the Hypersail project – which, using the same approach, developed a cutting-edge technological by-wire solution for the nautical sector.
The car can be driven in manual mode in the first six gears and reverse, or in automatic mode, offering maximum freedom to choose between driving engagement and comfort. Within this balance, the naturally aspirated V12 is the ideal engine for enhancing the progression and handling of gear changes, thanks to its rev range extending up to 9,500 rpm and the character of its power at high revs.
The interplay between the innovative gear lever, the clutch pedal, and the accelerator pedal becomes an integral part of the driving experience, fostering a deep connection between driver and car that allows the 12Cilindri’s full potential to be realised. The new Manuale by–wire system combines the technology of Ferrari’s highly acclaimed 8-speed DCT gearbox with a system redesigned from scratch, introducing entirely new components and a gear lever designed to deliver a pure, engaging analogue feel. The architecture features a gear lever selector, a control panel, and a pedal assembly with a clutch pedal (also by-wire) that allows the driver to manage the engagement and disengagement of the clutch pack, as well as updates to the control unit and gearbox/engine control software. The result is a blend of mechanical-electronic technology that delivers pinpoint precision and load control without compromising the driving feel, creating a unique offering in the world of high-performance motoring.
The manual control system consists of a mechanical module equipped with sensors and advanced kinematic mechanisms that replicate the mechanical loads typical of Ferrari manual gearboxes during the synchronisation, engagement, and disengagement phases. The kinematic mechanism generates clicks and load variations, providing clear feedback to the driver regarding gear engagement. If the clutch is not depressed or an unauthorised gear is selected, the system is able to mechanically inhibit engagement, preventing the operation from being completed; when the lock is not active, however, the kinematic mechanism is free to move. The manual control system is completed by two angle sensors that detect lever positions, a knob, and a backlit button panel for improved readability and integration with the interface. The compact, modular mechanism is machined from solid blocks and weighs less than 3.5 kg. Furthermore, even the acoustic effects of its movements have been the subject of dedicated development to enhance the perception of the underlying mechanics.
The manual gear-changing process is complemented by the three-pedal layout, completely redesigned for the Ferrari 12Cilindri Manuale. The clutch-by-wire pedal acts as a high-precision interface between the driver and the powertrain: the pedal position is detected by a position sensor on the pedal assembly and then translated into hydraulic actuation of the DCT clutch, thereby coordinating the transmission and engine during gear changes. The system recreates the typical load-travel curve of mechanically linked manual gearboxes thanks to an innovative passive mechanical system. An angle position sensor continuously reads the driver’s intent throughout the entire range of pedal travel. This results in behaviour consistent with the logic of traditional manual gearboxes: correct synchronisation yields a smooth, precise gear change; otherwise, it may become more difficult, resulting in a jerk or a stall – heightening driver involvement and the satisfaction of authentic torque feedback. The system also features specially developed transition logics between manual and automatic modes, as well as coasting management to ensure complete fluidity right down to idle, with behaviour consistent with the use of the clutch during deceleration.
Inside the cabin of the Ferrari 12Cilindri Manuale, the centre tunnel console, gear lever, knob, gear shift gate, and pedals reinterpret the iconic elements of Ferrari cars with lever-operated manual transmission in a contemporary way. The gear shift gate echoes the six-speed shift pattern, with reverse at the top left, while the round aluminium gear knob is enhanced by a backlit screen print indicating the six gears and the currently active driving mode (automatic/manual). The centre tunnel console area has been redesigned to improve ergonomics during manual gear changes and in automatic mode; the pedal assembly completes the driver-focused layout, arranged in a triangular configuration between the steering wheel and the seat. The iconic gear shift gate has been reinterpreted, retaining its original iconic status and integrating it harmoniously into the car’s stylistic language. The steel plate is embellished with an anodised aluminium sculpture in the shape of a tuning fork, which incorporates the control panel and key housing.
The design of the components and the leather-upholstered console have also been crafted to harmonise with the contemporary aesthetic of the Ferrari 12Cilindri in a balanced and coherent way: a refined touch, designed to discreetly celebrate the gear shift gate’s return to its original function.
The Ferrari 12Cilindri Manuale is offered as a limited series of just 1,499 cars, a number that recalls the displacement of the first Ferrari twelve-cylinder engine produced in 1947, becoming an integral part of the new model’s identity. It is designed for Ferraristi who are loyal to front-engined V12 two-seater berlinettas and seeking a more physical level of driving emotions.
Its exclusivity is further reinforced by a dedicated Tailor Made specification and details that ensure instant recognition – not merely as an extension of the range but as the very language from which the design took shape. The side badge features the car’s laser-etched logo, whilst the front splitter and rear wings feature a pinstripe finish that pays homage to the Ferrari 365 GTB4. These elements are complemented by a special finish for the scudetto, specially designed five-spoke forged wheels and aluminium door sills engraved with the car’s logo.
FERRARI 12CILINDRI
The Ferrari 12Cilindri draws inspiration from the iconic Ferrari Gran Turismo models of the 1950s and 1960s, fully embodying the ethos of Ferrari’s front-engined, two-seater V12s: a perfect blend of elegance, versatility, and performance. It represents the latest evolution of this prestigious lineage, carrying forward a unique heritage and raising it to new standards of performance, comfort, and design. Its design exudes sportiness and sophistication: simple, harmonious lines blend with innovative features such as integrated active aerodynamics designed to deliver unrivalled performance, and the reverse-opening bonnet that showcases the engine bay. The picture is completed by the twin pairs of exhaust tailpipes, a hallmark of Ferrari’s twelve-cylinder engines. Under the bonnet, the new naturally aspirated 6.5-litre V12, capable of delivering 830 hp and revving up to 9,500 rpm, offering linear power delivery and an unmistakable sound. With a top speed in excess of 340 km/h and acceleration from 0 to 100 km/h in approximately 3.0 seconds, the 12Cilindri redefines the concept of the modern grand tourer, combining extreme performance and uncompromising refinement.
